|
Service & Care
|
SERVICE:
SHOULD NEW DISCS AND PADS BE BEDDED
IN AND IF SO, HOW?
The answer is yes, for optimum
performance, any time different friction materials or discs are
introduced, a bedding procedure should be carried out.
-
While the motorcycle is stationary, pump
brakes to ensure a firm pedal.
-
Ride the bike cautiously to test fit and
function.
-
The brakes should be smooth, with no
vibrations, judder, etc.
-
Ride the bike to a remote area and
perform at least 30 brake applications of 3 second duration. Use
light/medium deceleration with varying starting speeds. Leave at least 1/2
mile between each brake application.
-
The purpose of this procedure is to
gradually increase the temperature in the components without inducing
thermal shock, and to mate the brake pad and disc friction surfaces.
-
After the repeated stops, ride the bike
for several miles with little or no braking in order to adequately cool
the components.
-
After the above process is completed,
the system is ready for normal use.
-
When the system achieves elevated brake
temperatures for the first time, a slight increase in pedal travel and
pedal effort may occur. After this first "fade" and proper cooling, the
system will maintain its optimum performance at all temperatures.
HOW LONG DO 360 BRAKE DISCS LAST?
The useable life of a brake disc is
influenced by a number of factors including vehicle weight, driving style,
vehicle usage, brake pad material, and many others. Therefore a blanket
disc lifetime cannot be given. However, when used in the same conditions,
a 360 Brake disc should meet or exceed the life of the disc it replaces.
It is important, however, to periodically check the disc thickness, and
replace the disc if it falls below the minimum allowed thickness.
CHROME
WARRANTY:
The 360 Brake Company ensures that our
parts are chrome plated to the highest quality. However, chrome must be
properly cared for. Salt, sand, and humidity are all bad for chrome. The
life of your chrome may be shortened if not properly cleaned with a mild
soap and water and waxed. Do not use abrasive or chemical cleaners. 360
Brake reserves the right to determine if the product has been properly
maintained and has not been abused. If your 360 Brake chrome product is
pitting, flaking and/or wearing off and has been maintained properly
without being abused, you may request to return it to 360 Brake and if
upon inspection it is found to be defective, 360 Brake will replace it, or
repair it at our option. Due to the fact that we out source our chrome
plating, we don’t warranty any product(s) after six (6) months from
delivery date.
|
