|
Bedding Procedure
Bleeding
Installation
Care
& Maintenance
|
REVOLUTIONIZING THE BRAKE INDUSTRY
CHOOSE THE
5"STANDARD OR 6" BIG BRAKE
-
·
The 5" Brake has a GVW (gross vehicle
weight - bike and rider) of 1000 lbs traveling at 80 mph.
-
·
The 6" Brake has approximately 30% more
stopping capacity and has a GVW of 1300 lbs traveling at 80 mph.
-
·
Brakes can be used interchangeably on the
front or rear, left or right side of the bike.
-
·
If replacing a dual brake set-up, the 360
Brake Company recommends either replacing with dual 5" Brakes or one 6"
Brake.
IT’S DESIGNED FOR
YOUR BIKE
-
·
The unit is designed for 1" axles. 3/4" &
metric reducer bushings sold separately.
-
·
They work with most standard master
cylinders (minimum 9/16th for a single brake or 11/16th for a dual brake
installation).
-
·
The perfect look for your Harley Davidson, custom chopper,
bagger, or customized V-Twin model.
-
-
IT’S ENGINEERED FOR
POWER
-
· The
360 Brake System utilizes a circular piston and pads activated by
hydraulic pressure to deliver 360 degrees of braking power to the rotor.
-
·
The new rotor, which is grooved and
vented, together with the brake hat's newly designed venting system provides superior airflow to
the brake.
-
· The
360 Brake System performs extremely well. It was tested in controlled
conditions against a rigorous testing protocol based on the FM VSS 122 DOT
test, and in some instances exceeded the protocol by over 100%!
IT’S IN A CLASS OF
ITS OWN
-
·
For more than 50 years, there have been no
significant changes in the design of the disc brake.
-
·
We believe
that the 360 Brake will revolutionize the brake industry with its unique
design, and outstanding performance characteristics.
|
