|
How to Order
The 360 Brake will ONLY fit aftermarket
billet wheels with a 5 hole bolt hole pattern and a minimum space of 6"
between the forks. The brake utilizes an AN-3 brake line fitting and has
universal mounting to either the left or right side, and front or rear of
the bike. Our 5"Brake is rated for a gross vehicle weight (bike &
rider) of 1000 lbs traveling at 80 mph. Our new 6" Brake has approximately
30% more stopping capacity and is rated up to 1300 lbs GVW (bike & rider).
The 360 Brake Company always recommends
that dual brakes installations be replaced with either a dual 5" Brake set-ups
or a single 6"Brake.
You must have the following information
ready when you place an order for your very own 360 Brake.
-
1. Axle
size? (360 Brake is designed for a 1" axle. (reducers sold
separately)
-
2. Wheel
Manufacturer or bolt hole pattern?
-
3.
Anti-rotation arm? (see Measurement Guides below)
-
4. Front or
Rear installation?
Click here for the
Order Form.
Click here for the
Wheel Manufacturer Fitment Guide.
If your
wheel isn't listed here, you must use the Measurement Guides below to
determine your bolt hole pattern.
Click here for the
Measurement Guides.
Click here for the
Installation Guide for the new 360 Brake.
Click here for the
Bleeding Instructions specific for the
360 Brake.
Springer Applications
Springer installations are considered
custom and are not supported by our technical support team at this time.
Installer takes full responsibility for engineering a method of
functionality.
Attention all 2008-2009 Harley
Davidson Owners
Harley Davidson has changed the axle
size starting with the 2008 models to a 25mm axle. If you would like a 360 Brake for
your 2008 it will require that you change your axle to 1". At this
time the 360 Brake does not work with the ABS system.
Customer Self-Installation Waiver
360 Brake wants to insure that all units
are installed correctly for the safety of the consumer. 360 Brake does not
believe the installation of this brake is a simple bolt on application.
Installation requires the knowledge base of a professional. If the
consumer insists on installing the 360 Brake without the use of a
professional installation technician, we will require that the customer
sign the above document and in doing so voids their warranty.
Professional Installation
Acknowledgement Form
To ensure your Brake is installed
correctly, we ask that only Professionals attempt to install this braking
system. Please have your preferred installer read and sign the above
referenced document to ensure your warranty is not voided.
|
